降低G级油井水泥初始稠度的控制措施

通过优化油井水泥熟料、油井水泥粉磨工艺、控制比表面积、SO3含量，有效降低油井水泥初始稠度。通过对水泥成品存储条件和存储时间的研究，确定了适宜的水泥出厂时间及后续工地的储存条件，保证了产品使用满足工地需求。     

大型摊铺机水稳全幅施工技术

大型摊铺机施工改进了传统小型摊铺机双台或多台梯段施工技术，具有消除摊铺搭接、碾压重叠、左右错台等影响的优点。本文针对单台大型摊铺机的施工工艺流程、注意事项进行分析，阐述单台大型摊铺机的相对优势。     

Research and development on membrane IS process for hydrogen production using solar heat

Thermochemical hydrogen production has attracted considerable interest as a clean energy solution to address the challenges of climate change and environmental sustainability. The thermochemical water-splitting iodine-sulfur (IS) process uses heat from nuclear or solar power and thus is a promising next-generation thermochemical hydrogen production method that is independent of fossil fuels and can provide energy security. This paper presents the current state of research and development (R&D) of the IS process based on membrane techniques using solar energy at a medium temperature of 600 °C. Membrane design strategies have the most potential for making the IS process using solar energy highly efficient and economical and are illustrated here in detail. Three aspects of membrane design proposed herein for the IS process have led to a considerable improvement of the total thermal efficiency of the process: membrane reactors, membranes, and reaction catalysts. Experimental studies in the applications of these membrane design techniques to the Bunsen reaction, sulfuric acid decomposition, and hydrogen iodide decomposition are discussed.     

Sustainable ammonia production through process synthesis and global optimization

Current ammonia production technologies have a significant carbon footprint. In this study, we present a process synthesis and global optimization framework to discover the efficient utilization of renewable resources in ammonia production. Competing technologies are incorporated in a process superstructure where biomass, wind, and solar routes are compared with the natural gas-based reference case. A deterministic global optimization-based branch-and-bound algorithm is used to solve the resulting large-scale nonconvex mixed-integer nonlinear programming problem (MINLP). Case studies for Texas, California, and Iowa are conducted to examine the effects of different feedstock prices and availabilities. Results indicate that profitability of ammonia production is highly sensitive to feedstock and electricity prices, as well as greenhouse gas (GHG) restrictions. Under strict 75% GHG reductions, biomass to ammonia route is found to be competitive with natural gas route, whereas wind and solar to ammonia routes require further improvement to compete with those two routes. © 2018 American Institute of Chemical Engineers AIChE J, 65: e16498 2019     

Quaternäre Metall/Metalloxid‐Katalysatoren als Wandkatalysatoren in Mikroreaktoren für Power‐to‐Gas‐Applikationen mittels kombinatorischer Hochdurchsatzmethoden

Catalysts of quaternary composition have been prepared and tested for the Sabatier process. For catalyst syntheses the following techniques have been used: sol‐gel methods, wet impregnation and incipient wetness impregnation. The Sabatier reaction was carried out at temperatures between 520 K and 670 K, pressures of 15 bar and 30 bar using a mixture H₂:CO₂ of 4:1. Activity screening of the microscale wall catalysts was performed by a custom‐built 10‐fold parallel gas‐flow microreactor setup in sequential operating mode. To analyze the gas phase compositions GC‐FID was used.     

Option pricing under a jump-telegraph diffusion model with jumps of random size

ABSTRACT

We present a finite difference method to solve a system of two Partial-Integro Differential Equations which arise from pricing an option under a Jump-Telegraph Diffusion Model for the underlying asset, considering the risk-neutral valuation formula under an equivalent martingale measure. This system is fully discretized using an Implicit–Explicit two-time level scheme and quadrature formulas. The resulting two tridiagonal algebraic linear systems are solved recursively using the Thomas Algorithm. Some numerical results are presented and the numerical order of convergence for the method is estimated. Finally, the robustness of the method is validated against an exact solution obtained for a perturbed problem.     

Decomposition process of bastnaesite concentrate in NaOH-CaO-H_2O system

A novel process of calcification-leaching for bastnaesite concentrate(REFCO_3) was proposed. The prior calcification was carried out in the system of NaOH-CaO-H_2O and the lgC-pH pattern for Ce-F-Ca-C-H_2O system was drawn. The thermodynamics result indicates that decomposition for bastnaesite requires certain alkaline condition, but excessive alkalinity also causes decomposition of CaF_2. XRD and SEM-EDS analyses on the calcification-leaching process reveal that bastnaesite first decomposes into RE(OH)_3 and CaF_2. Then, by HCl leaching rare earths were extracted,while CaF_2 was left in the leaching residue. In addition, effects of temperature, time, NaOH and CaO on the calcification were investigated. The results show that the leaching rate of rare earths(REs)reaches 72.5 wt%, at the same time 99.2 wt% of F is left in leaching residue with 20 wt% NaOH and 38 wt% CaO at 493 K for 180 min.     

CME Forum: a response to “Construction flow index: a metric of production flow quality in construction”

The study of types of flow in construction is a relatively new field. This paper reviews the work of Sacks et al. and reveals that they have applied a production-line metaphor with recognition of two production flows. Process flow: locations are equated with products moving down a production line. Operations flow: work crews are equated to work stations. Their work proposes an index of the quality of production flow in construction, but the research design has three significant flaws: the skilled interpretation of flow-line charts is not in turn applied to the interpretation of their example charts; the conceptual framework does recognize that the underlying metaphor requires levels of detail in both location and task that is not supported in their analysis. The meaning of “quality of flow” in this context is not defined. This debate raises important epistemological questions for those working in lean construction and location-based management. While the concept of “production flow quality” is important, the Sacks et al. methodology does not address the detailed planning of individual crews. It is only possible to apply the production-line metaphor if micro-management is adopted as detailed planning.     

Nano-to-macroporous TiO2 (anatase) by cold sintering process

Cold Sintering Process (CSP) was applied on commercial nanopowders to produce nanostructured TiO₂ anatase with nano-to-macro porosity. Nanoporous TiO₂ based materials were obtained by applying CSP at 150 °C and pressures up to 500 MPa on three TiO₂ nanopowders with different specific surface area (s.s.a. = 50, 90 and 370 m²/g), using water as transient aqueous environment. Although TiO₂ is insoluble in water, a density of 68% and s.s.a. = 117 m²/g were achieved from the powder with the highest specific surface area. A post annealing process at 500 °C increased the density up to 73% with a s.s.a. = 59 m²/g, and the crystallites dimensions passed from 110 Å in the powder to 130 Å in CSP material and 172 Å after post annealing. Finally, macroporosity was produced by using thermoplastic polymer beads as sacrificial templates within TiO₂ nanopowder during CSP, followed by a debonding at 500 °C.     

Analyzing Dynamic Change in Social Network Based on Distribution-Free Multivariate Process Control Method

Social organizations can be represented by social network because it can mathematically quantify and represent complex interrelated organizational behavior. Exploring the change in dynamic social network is essential for the situation awareness of the corresponding social organization. Social network usually evolves gradually and slightly, which is hard to be noticed. The statistical process control techniques in industry field have been used to distinguish the statistically significant change of social network. But the original method is narrowed due to some limitation on measures. This paper presents a generic framework to address the change detection problem in dynamic social network and introduces a distribution-free multivariate control charts to supervise the changing of social network. Three groups of network parameters are integrated together in order to achieve a comprehensive view of the dynamic tendency. The proposed approaches handle the non-Gaussian data based on categorizing and ranking. Experiments indicate that nonparametric multivariate procedure is promising to be applied to social network analysis.